I finally finished Zenitsu crochet pattern! Yay! The members of the main group of Demon Slayer characters are complete: Tanjiro, Nezuko, Inosuke, and Zenitsu. Even though there was quite a long delay in making each pattern, I was really happy to be able to make all four.
I made it as simple as possible for this Zenitsu crochet pattern. I didn’t add white accents to the sleeves so that the color change would be simpler. The coat still has white accents. Please pay attention to the color changes carefully. I have made a pattern in diagram to make it easier to understand. Hope it is useful.
You can read Zenitsu crochet pattern FREE in this post. The printable PDF crochet pattern is available to purchase on my Blog Shop, Etsy, Ravelry, and Ko-fi Shop.
You may want to crochet other characters from Demon Slayer, check the patterns in THIS LINK. You can also read other anime crochet patterns I’ve made HERE. I’ll always be adding new anime crochet pattern, so stay tuned!
Do you want to make your own version of amigurumi? Please check out Chibi Basic Body Crochet Pattern in THIS LINK. You can create anything you want with the chibi basic body crochet pattern.
I hope you like the pattern. Have fun!
FOLLOW CROCHETHEA ON SOCIAL MEDIA
Crochet Pattern
- Get Zenitsu inexpensive ad-free printable PDF crochet pattern HERE.
- Add this Zenitsu amigurumi crochet pattern to your Ravelry queue HERE.
- PIN Zenitsu crochet pattern to your Pinterest boards for later HERE.
Check out Demon Slayer Squad PDF Pattern Bundle
If you love my works you can support me on Ko-fi. Any support you send will help me afford more yarns and allow me to spend more time crocheting cute things and share the patterns with you ^-^
Notes
Zenitsu amigurumi is about 8.5 cm (3.35 inches) tall.
I used small ply Balinese cotton yarn (sport yarn, #2 Fine) and Tulip hook no. 3 (2.25 mm).
The similar yarn you can use is Schachenmayr Catania (100% cotton; 50 g (1.8 oz); 125 m (137 yds)).
Its size may vary according to the materials you used.
Materials
Sport yarns:
– beige, black, yellow, orange, white
(I used less than a 125m/50g ball of each color when making this project)
2.25 mm crochet hook
7 mm safety eyes
Polyester fill
Tapestry needle
Pins
Marker
Scissors
Adhesive
Abbreviations (US Terms)
MR = magic ring
ch = chain
sc = single crochet
hdc = half double crochet
dc = double crochet
inc = sc increase (2 sc in next stitch)
dec = sc decrease (join next 2 sts into 1)
BLO = back loop only
FLO = front loop only
sl st = slip stitch
Legs (make 2)
Use black
Round 1: MR, 6 sc (6)
Round 2: *2 sc, inc* 2 times (8)
Change to yellow
Round 3: *3 sc, inc* 2 times (10)
Change to black
Round 4: sc in each stitch (10)
Cut the yarn, make the 2nd leg. Don’t cut the yarn on 2nd leg, continue to work the body.
Body
Round 5: 2 ch, 10 sc in 1st leg, sc in 2 ch, 10 sc in 2nd leg, sc in 2 ch (24)
Round 6-7: sc in each stitch – 2 rounds (24)
Change to white
Round 8: BLO *6 sc, dec* 3 times (21)
Change to black
Round 9: BLO sc in each stitch (21)
Fill as you go
Round 10: *5 sc, dec* 3 times (18)
Round 11: sc in each stitch (18)
Round 12: *dec, 4 sc* 3 times (15)
Round 13: *dec, 3 sc* 3 times (12)
Change to white
Round 14: *1 sc, dec, 1 sc* 3 times (9)
Continue to work the head.
Prefer an ad-free, printable PDF version?
Grab Zenitsu Crochet Pattern HERE
Head
Use beige
Round 1: *inc* 9 times (18)
Round 2: *1 sc, inc* 9 times (27)
Round 3: *8 sc, inc* 3 times (30)
Round 4-10: sc in each stitch – 7 rounds (30)
Attach eyes between Round 6 and 7, 5 sc apart.
Round 11: *dec, 3 sc* 6 times (24)
Fill as you go
Round 12: *dec, 2 sc* 6 times (18)
Round 13: *dec, 1 sc* 6 times (12)
Round 14: *dec* 6 times (6)
Fill before close the hole. Fasten off.
Use white to embroider the buttons on the body.
Arms (make 2)
Use beige
Round 1: MR, 6 sc (6)
Change to orange
Round 2-3: sc in each stitch(6)
Change to yellow
Round 4-5: sc in each stitch (6)
sl st, turn, 2 sc, sl st.
No need to fill the arms.
Leave a long end for sewing.
Coat
Work in rows without turning ch. Pay attention to the color changes.
Row 1: orange 25 ch, skip 1 ch, 24 sc (24)
Row 2: turn, orange 1 sc, *white 1 sc, orange 5 sc* 3 times, white 1 sc, orange 4 sc (24)
Row 3: turn, orange sc in each stitch (24)
Row 4: turn, orange 4 sc, *white 1 sc, orange 5 sc* 3 times, white 1 sc, orange 1 sc (24)
Row 5: turn, yellow 6 sc, dec, 8 sc, dec, 6 sc (22)
Row 6: turn, yellow 1 sc, white 1 sc, yellow 4 sc, white 1 sc, yellow 5 sc, *white 1 sc, yellow 4 sc* 2 times (22)
Row 7: turn, yellow 4 sc, dec, 10 sc, dec, 4 sc (20)
Row 8: turn, yellow 3 sc, white 1 sc, yellow 3 sc, dec, white 1 sc, yellow 1 sc, dec, white 1 sc, yellow 4 sc, white 1 sc, yellow 1 sc (18)
Row 9: turn, yellow sc in each stitch (18)
Row 10: turn, yellow 5 sc, dec, 4 sc, dec, 5 sc (16)
Leave a long end for sewing.
Prefer an ad-free, printable PDF version?
Grab Zenitsu Crochet Pattern HERE
Hair
Use yellow
Round 1: MR, 6 sc (6)
Round 2: *inc* 6 times (12)
Round 3: *1 sc, inc* 6 times (18)
Next we work the strands (S), consist of 2 layers. S1-9 in 1st layer, S10-18 in 2nd layer.
Pay attention to the color changes on each strand.
S1: 9 ch, orange 5 ch, skip 3 ch, 2 hdc, yellow 9 hdc, skip 1 st, sl st (11)
S2-5: *11 ch, orange 5 ch, skip 3 ch, 2 hdc, yellow 11 hdc, skip 1 st, sl st* 4 times (13)
S6: 9 ch, orange 5 ch, skip 3 ch, 2 hdc, yellow 9 hdc, skip 1 st, sl st (11)
S7-9: *4 ch, orange 5 ch, skip 3 ch, 2 hdc, yellow 4 hdc, skip 1 st, sl st* 3 times (6)
For each strand of the 2nd layer, end with FLO sl st in the skipped st from 1st layer.
S10: 10 ch, orange 5 ch, skip 3 ch, 2 hdc, yellow 7 hdc, 3 dc, FLO sl st in 2nd skipped st (12)
S11-14: *11 ch, orange 5 ch, skip 3 ch, 2 hdc, yellow 11 hdc, FLO sl st* 4 times (13)
S15: 6 ch, orange 5 ch, skip 3 ch, 2 hdc, yellow 6 hdc, FLO sl st (8)
S16-17: *5 ch, orange 5 ch, skip 3 ch, 2 hdc, yellow 5 hdc, FLO sl st* 2 times (7)
S18: 6 ch, orange 5 ch, skip 3 ch, 2 hdc, yellow 6 hdc, FLO sl st (8)
Fasten off (or leave a long end for sewing).
Assembling
- Put on the coat to the body. Sew the upper coat to the body.
- Sew the arms to the coat.
- Put hair onto the head. Use pins to arrange the position of the hair. Pin the 1st layer strands with a gap between the strands, then close the gaps with the 2nd layer strands. S7-9 and S15-18 as the bangs. If you are pleased with the position, add adhesive to the hair strands one by one.
Finished! \(^o^)/
If you made this project and would like to share photos, I’d absolutely love to see! Here are links for sharing your finished creation. Or, feel free to share in the comment below!
If you love my works you can support me on Ko-fi. Any support you send will help me afford more yarns and allow me to spend more time crocheting cute things and share the patterns with you.
Post Zenitsu Crochet Pattern appeared first on Crochethea.
Zenitsu amigurumi is inspired from Demon Slayer. Pattern and pictures are original design by Crochethea. This pattern is for personal, non-commercial use only. You may link to this pattern but you may not copy any part of the pattern instructions and share it on other websites. You may sell items you make from this pattern, but only in small scale. If you share or sell items from this pattern, please credit Crochethea as the designer. Thank you!
©2024 Crochethea